Help from the Opentrons Team

Search results for: calibration

Calibrating labware FAQ

If you calibrate labware in one slot that calibration data is applied to all slots that labware exists… What is labware calibration? Why should you do it?… When should you calibrate labware?
M
Written by Morgan
Updated over a week ago

OT-One: Calibrating the Pipettes

Once your labware is calibrated and saved on your deck, you'll need to calibrate your pipettes so that… Also, make sure your pipette is correctly installed on your robot before attempting to calibrate… When calibrating pipettes, you'll save four positions: Top, Bottom, Blow Out and Drop Tip
Ethan Jones avatar
Written by Ethan Jones
Updated over a week ago

OT-One: Calibrating the Deck

Once all of your labware containers are calibrated, make sure to also calibrate your pipette(s)!… Each of these needs to be calibrated before your protocol can run… The list is populated based on which container you should calibrate first
O
Written by Opentrons
Updated over a week ago

OT-One: X & Y Belt Calibration

As a standard maintenance procedure run the X & Y belt calibration to keep your machine The X & Y… belt calibration zip file contains binary files for both Mac and Windows operating systems… Step 3: Unzip the file Step 4: Open the folder with the calibration files Step 5: Run the
O
Written by Opentrons
Updated over a week ago

Get started: Calibrate the deck

Find the Robot Calibration > Calibrate deck section. Select the Calibrate button… Deck calibration is one important part your OT-2's positional calibration, which is what makes sure it… Continue: Calibrate tip length and pipette offset Learn more: How positional calibration works on the
Max Marrone avatar
Written by Max Marrone
Updated over a week ago

Protocol Designer: There are pipettes or no labware to calibrate when I try to run a protocol

M
Written by Morgan
Updated over a week ago

Calibration best practices

Pipette Calibration Labware Calibration It is important to be mindful during pipette attachment… There are two calibration processes that require manual tip attachment: deck calibration and pipette… Cancelling pipette calibration
Ojas Patel avatar
Written by Ojas Patel
Updated over a week ago

Troubleshooting calibration issues

There are two types of issues related to calibration: technical issues that block the calibration processes… Complete a factory reset of pipette calibration and retry pipette calibration 2… Pipette calibration failure
Ojas Patel avatar
Written by Ojas Patel
Updated over a week ago

OT-One: How to access the calibration file

The easiest way to access the calibration file is to open the containers folder first… folder From this folder, you will need to navigate backwards in the file path one level to find the calibrations
Ethan Jones avatar
Written by Ethan Jones
Updated over a week ago

Get started: Calibrate labware

From the Protocol tab, select the Calibrate tab or the Proceed to calibrate button: Depending on… (To learn more, check out How calibration works on the OT-2.)… Labware calibration is meant for small adjustments
Ethan Jones avatar
Written by Ethan Jones
Updated over a week ago