This article is about the OT-One.
It's no-longer sold or actively supported by Opentrons, but we've kept this article here to help existing users. Please see our OT-2 Support articles for the most up to date information!
Taller labware containers may require additional clearance while transferring liquids between deck slots. If you only require a few millimeters of additional height you can change the Z height within your python code. If you require more than 10 millimeters to clear a container you will need to adjust the hardware which mounts the Z gantry (sounds hard, but actually quite simple).
M3 Allen Key
- Turn your robot so the back oriented towards you.
- Hold the bottom of the Z gantry with your non-dominant hand
- With your dominant hand take the M3 Allen key provided in your accessories kit and loosen the 8 screws which secure the Z gantry.
- Slide the Z gantry up to the desired height
- Refasten the 8 screws, as your refastening make sure the Z gantry is centered.