Occasionally during shipping, the 3D brackets which hold the X rail cable track in place may be damaged. Located within the accessories provided with your OT-One are the necessary replacement pieces.
M5 Allen Key
X Rail Bracket Right
X Rail Bracket Left
Have a 3D printer? Feel free to print additional brackets.
- Use your allen key to removed the screws fastening the damaged 3D printed hardware
2. Using your allen key refasten the 5 screws which attach the X cable rail bracket to the robot. There are inserts inside of the rail so you will only require the screws. Reuse the screws removed from the damaged hardware, there are also additional screws located in the accessories if you are missing any.
The right X rail bracket has a slot to secure the YR motor cable, you will need to disconnect the motor cable in order to thread it through the slot.