If you can’t connect to a Wi-Fi network, we recommend the following steps:

  1. Make sure your app and robot are fully up-to-date.

    1. Note: You can perform a manual update if needed.

  2. If you are connecting to an open network, please make sure the network does not use a captive portal. The OT-2 does not support captive portal networks.

  3. Double check your network credentials. The “Show Password” toggle can be useful to ensure you are typing any passwords in correctly.

  4. If you are having trouble connecting to a WPA2 Enterprise network, please consult your IT department. Your IT department will know more than us about your particular network setup and credentials. They may need to whitelist your robot’s MAC address or something similar.

  5. If you’re still unable to connect, connect our Support Team with the error message(s) you are receiving along with any details from your IT department (if applicable).

If you are able to connect your OT-2 to Wi-Fi but your app is unable to find your robot on your Wi-Fi network, please ensure that your network and firewall(s) are set up to allow traffic as described in the network requirements for the OT-2 Support article. If you are on an enterprise network, you may want to check in with your IT department.

Still having trouble?

If you are still unable to establish a Wi-Fi connection to the robot, please reach out to Opentrons Support directly using Opentrons Messenger.

Did this answer your question?