To prevent damage during shipping, the axes of the OT-One S are secured with 6 locking bolts and 2 L brackets.
These need to be removed prior to powering on your robot. All of the hardware necessary to remove them has been provided within your accessory box.
Step 1: Y left locking bolts
Y right locking bolts
Use the largest allen key in your set to remove the bolts, you may leave the insert in the rail it will not affect the performance.
Step 2: OT-One S Hood will have the X axis locking bolts on the back of the robot by the cable track.
OT-One S Pro will have the locking bolts on the front, one behind the B motor and another
Step 3: Z axis locking L brackets
Use the 2nd smallest allen key in your set to loosed and slide off.
If you have any issues or further questions please contact us! email@example.com